Updating Mach3

  1. Download files to the pc here. You may receive a warning that this file is not downloaded often. Choose to keep the file.
  2. Choose to SAVE the file and not to open it. Please remember the location you saved the file.
    In most web browsers, there is a default file location where files are saved such as a ‘downloads’ folder. Where the file is saved can be found by looking at the browsers Options or Settings menu.
  3. [If you are already working on the CNC computer you can skip this step.] Copy the contents of the unzipped file to a USB Stick/Thumb Drive and transfer it to the CNC computer.
  4. Double click on the file, and click ‘Extract’. If asked, choose ‘Replace All’.
  5. Click OK and start Mach3

Related Posts

How often you need to change the consumables on your Powermax 45/65/85/105/125 will depend on a number of factors: •…

Ensure the black cable is connected to the UC100 and is plugged into the USB port on the computer. Also…

Check if the SheetCam software is registered and licensed. Go to >Help then >About.

Work with us today

For more information on our products, services, and solutions, and to get
pricing, please click on the button below.