SheetCAM Recommended Settings

We’ve created a template for the most common materials and the settings you will need to cut using the Hypertherm plasma cutters.

To make use of these, download the correct file for your machine, extract / unzip the file, then load the toolset into Sheetcam (File -> Open Toolset)

To always open that toolset click File -> Save default toolset.

Hypertherm PMX45XP

Hypertherm PMX85

Hypertherm PMX105

Hypertherm PMX125

Related Posts

How often you need to change the consumables on your Powermax 45/65/85/105/125 will depend on a number of factors: •…

Ensure the black cable is connected to the UC100 and is plugged into the USB port on the computer. Also…

Check if the SheetCam software is registered and licensed. Go to >Help then >About.

Work with us today

For more information on our products, services, and solutions, and to get
pricing, please click on the button below.