Machine is not moving | mach3

If the controller does not have a UC100. Go into device manager.

Try these two settings in the ports and pins in Mach3. If it’s not in there it could be in the “MULTIFUNCTION ADAPTORS”

Related Posts

How often you need to change the consumables on your Powermax 45/65/85/105/125 will depend on a number of factors: •…

Ensure the black cable is connected to the UC100 and is plugged into the USB port on the computer. Also…

Check if the SheetCam software is registered and licensed. Go to >Help then >About.

Work with us today

For more information on our products, services, and solutions, and to get
pricing, please click on the button below.