Ultracut Software Activation

Mach3 Update

Please update Mach3 to the latest version available, instructions are as follows;

1. Download this file to your pc Mach3.exe
   You may receive a warning that this file is not downloaded often. Choose to keep the file.
2. Choose to SAVE the file and not to open it. Please remember the location you saved the file.
   In most web browsers, there is a default file location where files are saved such as a ‘downloads’ folder. Where the file is saved can be found by looking at the browsers Options or Settings menu.
3. [If you are already working on the CNC computer you can skip this step.]
   Copy the contents of the unzipped file to a USB Stick/Thumb Drive and transfer it to the CNC computer.
4. Double click on the file, and click ‘Extract’
   If asked, choose ‘Replace All’
5. Click OK and start Mach3

Mach3 Activation

1. Go to www.machsupport.com
2. Click the large red cart button in the upper right hand corner of the screen.
3. Enter your registration code in the box provided and push the “Apply coupon or registration code” button that is directly beside the entry box. (enter the code emailed to you by your support team member)
4. Supply all required registration information by following the directions on the website screen.
5. You will receive an email with your licence file. Save this licence file to a location on your computer (ie. Desktop)
6. Copy the licence file into your Mach3 installation folder (C:\Mach3 by default)

SheetCAM Activation

The SheetCAM software will be already installed on your CNC computer.
Instructions for loading this file are as follows:

1. Click on the link: www.sheetcam.com/Register/token
2. Enter the licence token ID (emailed to you by your support team member)
3. Enter the name you want to register this license to (Company Name usually)
4. Enter email address (this will be used to send the license file to you)
5. Click next and follow prompts to complete registration
6. You will receive an email with your license file. Save this license file to a location on your computer (e.g. desktop)
7. Open SheetCAM program
8. Click on the ‘Help’ menu and select ‘Install license file’
9. Using the box that appears, navigate to the license file you just saved and open it
10. Close SheetCAM program
11. Next time you open SheetCAM is should be licensed

Tip: It is a good idea to keep a backup of this license file.

Caution: Please note that this license is for ONE computer only. Using it on multiple computers could result in the license being permanently disabled.